Production » Dry Mixtures
Tile Glue T1 UniversalIndication:
The mixture consists of lime sand compound, “Portland” cement, polyvinyl acetate glue and extra cellulose compounds. Designed for interior and exterior finish works (ceramic tiles, natural and artificial stones, plaster, gypsum cardboard, as well as consolidation of substances having firm area). It can also be used for pouring floors. It is safe and ecologically clean.
The utilized surface should be dry, clean, smooth, without any lumps. Before the beginning of the works (except gypsum cardboard) the surface should be slightly moistened. Gradually dilute the mixture with water bringing to necessary consistence (25 kg of dry mixture – 7 liters of water). Mix the ready mixture after 10 minutes once more and it is ready to be used during 3 hours' period. The plastering should be executed with special cogged trowels. Putty coating thickness should not exceed 3 mm. On work completion the tools should be washed by water. The works are recommended to be executed at an ambient temperature no less than + 5 C degrees.
25 kg – 7-8 square meter (5 mm coating)
Mixture consumption quantity is strongly conditioned by the surface structure and degree of thickness.
Packed in 25 kg paper sacks.
To store in a dry place, on wooden bottoms. Shelf time – 6 months